By Enda McLarnon — Experienced UK DIYer sharing practical fixes from my 1958 red brick home.
Part of my Angle Grinder Buying Series
Yes, you can cut tiles with an angle grinder, and for many UK DIY jobs it is the most practical way to do it. Straight cuts, notches, cut-outs for sockets, and even gentle curves are all achievable once you have the right blade and a steady technique.
A dedicated tile cutter will give you a cleaner straight cut on a large-format tile, but an angle grinder wins on flexibility and cost. Most DIYers already own one, the diamond blades are inexpensive, and a grinder is the only realistic option for the awkward jobs, such as cutting a curve around a toilet pedestal, trimming a tile that is already fixed to the wall, or making an L-shaped cut around a door frame.
The main challenges are getting a clean edge without chipping, and controlling the fine silica dust that cutting tiles produces. Both are solvable, and this guide covers them properly.
Quick Answer
If you are wondering can you cut tiles with an angle grinder, the answer is yes. An angle grinder is well suited to cutting tiles when you:
- Fit a continuous rim or turbo diamond blade — never a standard abrasive disc or stone-cutting disc
- Choose a thin blade rated for porcelain if you are cutting porcelain, which is much harder than ceramic
- Support the tile properly on a stable surface before cutting
- Mark the cut with a pencil and apply masking tape to reduce chipping
- Make a light scoring pass first, then cut through fully on the second pass
- Keep the blade moving steadily and never force it or let it sit in one spot
- Control dust: work outside where possible, use water to suppress dust if you can, and wear suitable respiratory protection
Tile Dust Safety — Read This First
Cutting tiles with an angle grinder produces respirable crystalline silica (RCS), a fine dust that is harmful to breathe in. The Health and Safety Executive is clear that cutting tiles and similar silica-containing materials can produce very high dust levels and requires effective control, including suitable respiratory protection (HSE construction dust guidance).
When cutting tiles:
- Work outdoors or in a well-ventilated space where possible — never in a sealed small room
- Use water to suppress dust if you can: a steady trickle on the cut line (or a helper with a spray bottle) dramatically reduces airborne dust and also keeps the blade cool
- Wear a suitable dust mask — for this type of work, an FFP3-rated disposable or equivalent respirator is the sensible choice, and eye protection is essential
- Keep other people, children and pets away from the cutting area
- Don’t dry-sweep the dust cloud afterwards as it is better to damp down and wipe, or use a vacuum suitable for fine dust
If you cut tiles regularly, consider a wet tile cutter for straight cuts instead, as it solves the dust problem almost entirely and gives cleaner edges. For one-off DIY jobs, the angle grinder with water suppression and a good mask is a reasonable approach.

Choosing the Right Blade
The blade is everything. A standard abrasive cutting disc will burn out on tile and can be genuinely dangerous, and a stone/segmented diamond blade will chew through ceramic but leave a chipped, ragged edge on glazed tiles.
There are three types of diamond blade to know about:
- Continuous rim: The smoothest, cleanest cutting blade for ceramic and glazed tiles as the continuous edge minimises chipping. Slower than the others, but the right choice for visible edges.
- Turbo rim: A serrated continuous edge that cuts faster while still giving a good finish. The best all-round choice for porcelain and harder ceramics. For porcelain, choose a thin turbo blade specifically rated for porcelain.
- Segmented: Fast, aggressive, for stone, concrete and masonry. Fine for rough work on quarry tiles and natural stone, but expect chipping on glazed ceramic — not the blade for a visible tile edge.
Good UK options at each level:
- Budget: Erbauer’s 115mm diamond blades from Screwfix (the turbo porcelain version is a popular DIY choice at a low price) — Check Screwfix
- Mid-range: Marcrist and Mexco blades (such as the Mexco UHXCEL for ultra-hard materials) — great value for porcelain — Check Price at Amazon UK
- Premium: Rubi TCR115 SUPERPRO and Norton Multi-Material blades — what professional tilers use when the finish matters — Check Price at Amazon UK

If you only cut tiles occasionally, the budget turbo blade plus careful technique will give you a perfectly acceptable finish. For more on choosing discs for your grinder, see my guide to angle grinder discs explained and my best angle grinders for the UK buyer’s guide.
What You Need Before Cutting
For a typical tile-cutting job, you will need:
- An angle grinder (115mm is the most common DIY size; a 230mm grinder is overkill for tiles and harder to control)
- A diamond blade suited to your tile type (see above)
- A tape measure and pencil
- Masking tape for marking over — pencil on tape is easier to see and reduces edge chipping
- A stable work surface, supports, and clamps (an old workbench with a softwood offcut to cut onto is ideal)
- A straightedge for straight cuts
- Eye protection, hearing protection, and an FFP3-rated dust mask
- Water for dust suppression (spray bottle or trickle from a container)
- Optional: a tile scribe and nippers for simple straight cuts in thin ceramic — often easier than the grinder for small jobs
Before you start, check that the blade is undamaged and rated for your grinder’s speed, that the guard is fitted and positioned between you and the tile, and that the tile is properly supported with the cut line clear of the surface underneath. You want to cut onto a softwood offcut, not your bench or a concrete floor.
How to Cut Tiles With an Angle Grinder — Step by Step
1. Measure and mark
Mark the cut line with a pencil on masking tape applied to the glazed face of the tile. The tape gives you a visible line to follow and reduces chipping along the cut edge.
2. Support the tile properly
Lay the tile glazed-face up on a stable surface with a softwood offcut underneath the cut line, and clamp it so it cannot move or vibrate. Vibration is a major cause of chipped edges and cracked tiles.
3. Make a light scoring pass first
Run the grinder along the line with light pressure, scoring the glaze a few millimetres deep. This gives the blade a track to follow and dramatically reduces chipping on the finished edge. Don’t try to cut through in one pass.
4. Cut through steadily
Make the full pass at a consistent, moderate speed. Let the blade do the work, as forcing it overheats the blade, glazes the diamond segments, and chips the tile. If the blade starts to slow or discolour, ease off or pause and let it cool (a splash of water helps). Never let the grinder sit running in one spot on the tile.
5. Tidy the edge if needed
A rub stone or diamond hand pad smooths any roughness quickly. If the cut edge will be hidden behind a trim or a fixture, don’t bother as it doesn’t need to be perfect.
Cutting Curves, Notches and L-Shaped Cuts
This is where the angle grinder genuinely beats a straight-line tile cutter:
- Curved cuts (e.g., around a toilet pedestal): Mark the curve on tape, then make a series of short, straight “tangent” cuts from the tile edge up to the line, like spokes. Knock out the waste segments, then grind back to the line. Take off material gradually, and never try to follow the curve in one sweeping pass.
- L-shaped cuts (e.g., around door frames): Cut one leg of the L fully, then the other, meeting in the corner. Don’t try to turn the blade in the cut.
- Square cut-outs (e.g., socket boxes): Drill the corner holes first with a diamond-tipped hole saw or drill bit, then cut between them with the grinder. The drilled corners stop the blade from overrunning the cut-out.
- Trimming a fixed tile: One of the grinder’s best tricks — you can trim a tile already on the wall (for example when a flooring change means a door frame needs undercutting). Use shallow passes, a steady hand, and be very aware of the dust. For anything to do with grout removal rather than tile cutting, an oscillating multi-tool with a carbide blade is often the better tool — see my guide to the best oscillating multi-tool blades UK.
When an Angle Grinder Is the Wrong Tool
Be honest about the job before you start:
- Long, straight cuts on large-format tiles: A manual tile cutter or wet tile saw will be straighter and cleaner, with far less dust. The grinder can do it, but keeping a 600mm cut dead straight with a freehand grinder takes practice.
- Very thin or brittle ceramic: These chip badly whatever you do with a grinder. A manual scribe-and-snap cutter is faster and cleaner.
- Anything inside with no ventilation: The dust is the deal-breaker. Move the cutting outside, or hire/borrow a wet cutter.
If you don’t own an angle grinder yet, my best angle grinders for the UK guide covers good options at DIY prices, and my article on how to use an angle grinder safely runs through the basics of guards, discs and PPE.
Frequently Asked Questions
What is the best angle grinder disc for cutting tiles?
A continuous rim or turbo rim diamond blade rated for your tile type. Use continuous rim for the cleanest finish on glazed ceramic, and a thin turbo blade rated for porcelain on porcelain tiles. Never use an abrasive cutting disc as it will burn out and can shatter.
Can you cut porcelain tiles with an angle grinder?
Yes, but porcelain is much harder than ceramic, so blade quality matters much more. Use a thin turbo diamond blade specifically rated for porcelain (budget options from Erbauer work, and brands like Marcrist, Mexco and Rubi are better), keep the blade cool, and expect a slower cut than ceramic.
How do you stop tiles chipping when cutting?
Use a continuous rim blade, put masking tape over the cut line, make a light scoring pass before cutting through, support the tile so it cannot vibrate, and don’t force the blade. Chipping is usually caused by a segmented blade, vibration, or rushing.
Do you need to use water when cutting tiles?
It’s not essential, but it is strongly recommended — water suppresses the harmful silica dust, keeps the blade cool, and extends blade life. Even a helper spraying a fine mist on the cut line makes a significant difference. If you cut dry, work outside and wear an FFP3-rated mask.
Can you cut a curve in a tile with an angle grinder?
Yes — make a series of short straight cuts up to the marked curve (like spokes on a wheel), remove the waste, then grind back to the line. It is slower than a straight cut but very doable with a steady hand.
Final Verdict
An angle grinder with the right diamond blade is a completely legitimate way for UK DIYers to cut tiles. It is also the only practical tool for curves, notches and trimming tiles already fixed in place. Get a continuous rim or thin turbo blade, tape and score your cut line, support the tile properly, and take the dust seriously with water suppression and an FFP3 mask.
For long straight cuts on expensive large-format porcelain, a wet tile cutter is still the better tool for the job, but for everything else the angle grinder earns its place in the shed.

About the Author: Enda McLarnon
I’m an experienced UK DIYer tackling renovation life inside a 1958 red brick home.
I built this blog to help beginners conquer home maintenance anxiety and save a fortune on expensive trade calls.