Festool Cleantec Hose Adapter Compatibility Matrix: What Fits DeWalt, Makita, Bosch & Trend?

By Enda McLarnon — Experienced UK DIYer sharing practical fixes from my 1958 red brick home.

Disclosure: As an Amazon Associate, I earn from qualifying purchases made through links on this page. If you buy a tool through my links, it costs you nothing extra, but the small commission helps me keep this site running.

f you run a workshop or work on site in the UK, you already know that dust extraction is one of the biggest productivity bottlenecks. Festool’s Cleantec bayonet system (D27 and D36) is widely regarded as the gold standard for secure suction, flexible anti-static hoses, and clean workshop air.

However, unless your workshop is 100% Festool green, you hit an immediate wall when connecting that premium hose to power tools from DeWalt, Makita, Bosch Professional, or Trend.

Every manufacturer uses different dust port outer diameters (OD), inner diameters (ID), proprietary twist-locks, and tapers. Standard rubber friction cones often slip off mid-cut, restrict airflow, or collapse under vacuum suction.

This guide provides an exact, millimetre-accurate compatibility matrix and broken-down solution guide so you can seamlessly pair your Festool hose with any tool on your bench—without spending hundreds of pounds on extra extractors.

The Core Dimensions: Understanding the Festool Cleantec System

Before ordering adapters, it helps to know what measurements you are actually working with on your hose end:

  • Festool D27 Hose End (Standard 27mm Anti-Static Hose):
    • Cleantec Bayonet Twist-Lock: Internal diameter of approximately 31.5mm. Fits directly onto native Festool tool spigots.
    • Stepped Rubber Sleeve (D27/32): Features a flexible tapered rubber outer sleeve (37 to 39 OD) for friction-fitting over small ports.
  • Festool D36 Hose End (36mm High-Volume Hose):
    • Designed primarily for high-chip volume tools like thick-stock planers, heavy mitre saws, and router tables. Uses a larger bayonet coupling and a 36mm internal bore.

Master Hose-to-Tool Compatibility Matrix

The table below outlines how native Festool D27 and D36 hose ends connect to popular UK trade power tools, along with the exact adapter part numbers required.

Tool Brand & CategoryNative Tool Port SpecDirect Fit with Festool D27 Bayonet?Recommended Adapter / Workaround Solution
DeWalt AirLock Tools (e.g., DWE575 circular saw, DWE7492 table saw)DeWalt AirLock Twist-Lock 30.5mm ID❌ NoDeWalt DWV9000 AirLock Adapter (screws directly onto Festool hose thread)
Makita Plunge & Circular Saws (e.g., DSP600, SP6000J)38mm OD/32mm ID❌ NoMakita 195547-8 38mm rubber cuff) or custom 3D-printed PETG twist-lock
Makita Compact Routers & Sanders (e.g., RT0700C, BO5031)22mm to 25mm OD❌ NoMakita 195546-0 24mm rubber adapter
Bosch Professional (Blue) (e.g., GKT 55 GCE plunge saw)35mm OD (Click & Clean system)❌ NoBosch VAC024 35mm adapter or standard 35mm rubber step reducer
Trend Woodworking Routers (e.g., T11, T14, T4)39mm OD/34 mm ID❌ NoTrend CRT/3 Adapter or custom 3D-printed PETG bayonet sleeve
Generic UK Bench Tools (Mitre saws, bench sanders)Multi-step taper 25mm to 42mm❌ NoUniversal stepped rubber reducer cone or PETG hard adapter

Brand-by-Brand Adapter Solutions

1. DeWalt Power Tools (The DWV9000 Solution)

Dewalt air lock connector beside a 3D printed connector

DeWalt uses its own proprietary AirLock twist-lock mechanism across most current-generation corded and 18V XR / 54V FlexVolt tools. The Festool bayonet lugs do not lock into the AirLock slots.

  • The Solution: The DeWalt DWV9000 AirLock Adapter.
  • How to Install: You can unscrew the standard rubber Cleantec sleeve off the end of your Festool anti-static hose (it features a left-hand reverse thread) and screw the DeWalt DWV9000 directly onto the bare Festool hose spiral. This provides a positive, lockable seal on all DeWalt tools.

2. Makita Workshop Tools

Makita uses two main dust extraction sizes across their cordless and corded ranges: a small 24mm port on sanders/trim routers and a larger 38mm port on plunge saws and mitre saws.

  • For Small Ports (Sanders & Trim Routers): Use the Makita 195546-0 joint adapter. It slips into the small tool port while taking the tapered end of the Festool sleeve.
  • For Track Saws & Plunge Saws (DSP600 / SP6000J): The Makita 195547-8 adapter provides a tight friction seal over the 38mm saw port.

3. Bosch Professional “Click & Clean”

Bosch Blue tools feature a 35mm outer diameter spigot with two click-in detents. While the Festool rubber sleeve can be forced over some Bosch ports, heavy vibration will cause it to pop off.

  • The Solution: A standard Bosch VAC024 or a rigid 35mm-to-32mm friction reducer. For fixed workshop setups, a 3D-printed PETG locking collar is ideal because it engages with the Bosch side pins while locking into the Festool bayonet.

4. The 3D-Printed PETG Alternative (UK Custom Makers)

If you do not want to keep screwing and unscrewing hose ends when switching between tool brands on site, turn to UK 3D-printing specialists (widely available on eBay UK).

Look specifically for PETG-printed adapters (avoid PLA, as PLA becomes brittle and cracks when exposed to cold van temperatures or shop drops). These custom adapters feature a female Festool Cleantec bayonet on one side and the precise brand twist-lock (DeWalt AirLock, Makita twist, or Trend sleeve) on the other.

Recommended Accessories & Where to Buy

rubber friction connectors vs twist lock connectors with explanations

To complete your dust extraction setup, here are the essential adapters and accessories mentioned in this guide:

Hopefully this will clarify a few headaches that you may have had.

enda holding his combi drill

About the Author: Enda McLarnon

I’m an experienced UK DIYer tackling renovation life inside a 1958 red brick home.

I built this blog to help beginners conquer home maintenance anxiety and save a fortune on expensive trade calls.